For the etching of steel cliché, thin and thick, Comec Italia has developed the SA series. To use in combination with the photoexposures  BR M series, the SA engraving machines are composed of a development bath with thermostat, a control panel and a spray etching system with oscillating nozzles, for a precise and professional processing.
The models (SA 4200, SA 4700, SA 5000) differ in size, power and capacity of the developing tank.

  • Electric power supply220/110 V
  • Width1600 mm
  • Height1200 mm
  • Depth880 mm
  • Weight110 Kg
  • Power3000 W
  • Useful format500 mm
  • Tank capacity20 Lt
AUR 360 °
The AUR 360 ° device allows the 360° printing of the spherical objects. It is a part holder which rotates under...
RR and RRR devices
You can install the RR and RRR device on the pad printing machines with 2 or 3 colors of Comec...
Automatic pads cleaning device
Automatic pads cleaning device - All pad printing machines produced by Comec Italia can be equipped with an automatic and...
Ink pump
The ink pump is equipped with a 1 L container and charges the liquid directly from it to the inkcup,...
Pick And Place
For the automatic loading and unloading of workpieces to be printed Comec Italia is able to provide pick & place...
Master Flow
For the drying of parts after printing is available from Comec Italia the Master Flow device, a provider of high-temperature...
Portable Hot Wind
Hot Wind 200/300 is a portable device that delivers a stream of hot air directly between the pad and the...
Hot Wind 200/300
Hot Wind 200/300 is a device that delivers a stream of hot air directly between the pad and the workpiece....
Quality control
  It is possible to mount, on automatic machines or in production lines where the operator has no possibility to check...