Automatic line for the pad printing of toothbrushes 8 + 8 colors on both sides, with 4 print heads in 4 colors, hermetic inkcups with ceramic rings diameter 130 mm, maximum printing area 115 mm, pick and place loading 2 pieces at a time, two linear feeders 54 positions, automatic reversal of the piece for printing on the second side, devices for pre- and post-treatment of parts by flaming, automatic and programmable pads cleaning, adjustable hot air Hot Wind 200, automatic unloading of the pieces directly on infrared oven MT3 for the drying of the pieces.

  • Mode of operationAutomatic
  • Hot airHot Wind 200
  • Hermetic inkcup dimensionsdiameter 130 mm
  • Max printing areadiameter 115 mm
  • LoadingAutomatic with pick & place 2 pieces at a time
  • UnloadingAutomatic
  • Automatic pads cleaningYes
  • OvenMT3
  • Pieces pre-treatment systemGas flaming
  • Feeder2 linear feeders 54 stations
  • Drying systemYes
  • Pieces rotation systemYes for the double-sided printing
Photocopiers / Photoexposures
Washing machines
Ovens
Before and after printing treatment devices
Colorbox
Steel cliché engraving machines
Film printers
AUR 360 °
The AUR 360 ° device allows the 360° printing of the spherical objects. It is a part holder which rotates under...
RR and RRR devices
You can install the RR and RRR device on the pad printing machines with 2 or 3 colors of Comec...
Automatic pads cleaning device
Automatic pads cleaning device - All pad printing machines produced by Comec Italia can be equipped with an automatic and...
Ink pump
The ink pump is equipped with a 1 L container and charges the liquid directly from it to the inkcup,...
Pick And Place
For the automatic loading and unloading of workpieces to be printed Comec Italia is able to provide pick & place...
Master Flow
For the drying of parts after printing is available from Comec Italia the Master Flow device, a provider of high-temperature...
Portable Hot Wind
Hot Wind 200/300 is a portable device that delivers a stream of hot air directly between the pad and the...
Hot Wind 200/300
Hot Wind 200/300 is a device that delivers a stream of hot air directly between the pad and the workpiece....
Quality control
  It is possible to mount, on automatic machines or in production lines where the operator has no possibility to check...