Automatic pad printing machine for the printing of single-dose vials. Electronic print head high production rate, hermetic inkcups with ceramic rings diameter 110 mm, maximum printing area 95 mm, electromechanical rotary table 12 positions, hot air on pads Hot Wind 200, corona device for surface pre-treatment of parts , automatic and programmable pads cleaning. Automatic loading and unloading with pick & place, output about 2500 pieces/hour.

  • Mode of operationAutomatic
  • Hot airHot Wind 200
  • Hermetic inkcup dimensionsdiameter 110 mm
  • Max printing areadiameter 95 mm
  • LoadingAutomatic with pick & place
  • UnloadingAutomatic with pick & place
  • Output2500 pieces/hour
  • Automatic pads cleaningYes
  • Pieces pre-treatment systemCorona
  • FeederRotary table 12 positions
Photocopiers / Photoexposures
Washing machines
Ovens
Before and after printing treatment devices
Colorbox
Steel cliché engraving machines
Film printers
AUR 360 °
The AUR 360 ° device allows the 360° printing of the spherical objects. It is a part holder which rotates under...
RR and RRR devices
You can install the RR and RRR device on the pad printing machines with 2 or 3 colors of Comec...
Automatic pads cleaning device
Automatic pads cleaning device - All pad printing machines produced by Comec Italia can be equipped with an automatic and...
Ink pump
The ink pump is equipped with a 1 L container and charges the liquid directly from it to the inkcup,...
Pick And Place
For the automatic loading and unloading of workpieces to be printed Comec Italia is able to provide pick & place...
Master Flow
For the drying of parts after printing is available from Comec Italia the Master Flow device, a provider of high-temperature...
Portable Hot Wind
Hot Wind 200/300 is a portable device that delivers a stream of hot air directly between the pad and the...
Hot Wind 200/300
Hot Wind 200/300 is a device that delivers a stream of hot air directly between the pad and the workpiece....
Quality control
  It is possible to mount, on automatic machines or in production lines where the operator has no possibility to check...