Automatic pad printing machine for the printing of contactors 5 colors. Rotating 90° and 180° workpiece carrier for printing on three sides, independent pads to adapt to different workpiece heights, brushless motorized elliptical feeder 14 stations, hermetic inkcup with ceramic rings diameter 130 mm, automatic and programmable pads cleaning device. The machine is equipped with 2 pick & place devices for the automatic loading and unloading of the pieces, output about 1000 pieces/hour.

 

  • Mode of operationAutomatic
  • Independent padsYes
  • Hermetic inkcup dimensionsdiameter 130 mm
  • LoadingAutomatic with pick & place
  • UnloadingAutomatic with pick & place
  • Output1000 pieces/hour
  • Automatic pads cleaningYes
  • FeederElleptical feeder 14 stations brushless motor
  • Pieces rotation systemYes for printing on 3 sides
Photocopiers / Photoexposures
Washing machines
Ovens
Before and after printing treatment devices
Colorbox
Steel cliché engraving machines
Film printers
AUR 360 °
The AUR 360 ° device allows the 360° printing of the spherical objects. It is a part holder which rotates under...
RR and RRR devices
You can install the RR and RRR device on the pad printing machines with 2 or 3 colors of Comec...
Automatic pads cleaning device
Automatic pads cleaning device - All pad printing machines produced by Comec Italia can be equipped with an automatic and...
Ink pump
The ink pump is equipped with a 1 L container and charges the liquid directly from it to the inkcup,...
Pick And Place
For the automatic loading and unloading of workpieces to be printed Comec Italia is able to provide pick & place...
Master Flow
For the drying of parts after printing is available from Comec Italia the Master Flow device, a provider of high-temperature...
Portable Hot Wind
Hot Wind 200/300 is a portable device that delivers a stream of hot air directly between the pad and the...
Hot Wind 200/300
Hot Wind 200/300 is a device that delivers a stream of hot air directly between the pad and the workpiece....
Quality control
  It is possible to mount, on automatic machines or in production lines where the operator has no possibility to check...